[PSP 2000/3000]Custom Firmware Enabler 3.70 for ChickHEN
本帖最后由 月神侠 于 2009-12-25 19:43 编辑PSP2000（包括TA-088v3主板）跟PSP3000都可以
CustomFirmware Enabler 3.70 to 5.03 for Xenogears.
CFWEnabler@MHU2D.net
http://MHU2D.Net
MHU2D:
_________________________
What is MHU2D?
- It's official support Web Enabler Custom Firmware among other interesting things that we will be publishing shortly.
All questions concerning this program will be answered in the forum MHU2D.Net, new versions will be published there too.
Watch for new news, because there are very interesting developments to emerge.
But not only supports this program, the forum also allowed to comment other programs, news, ideas, and more from any platform or technology in general. Updated news and more from http://MHU2D.Net
_________________________
What Is It?
- A program that activates the functions of the custom firmware using ChickHen MHU.
What do I need?
- A PSP (Model 2000 or 3000)
- Firmware version 5.03.
- ChickHen R2 (at least MHUSpeed is recommended).
What should I do to upgrade?
There are two ways:
- If you have a version between 3.10 and 3.51 can use the update via network, but first you must download the program NetUpdate CFWEnabler Fixer 1.01 "and install it.
and then in the xmb go to the "Network Update"
- If you have version 3.60 you can use the Network Update directly from the XMB.
- If you have another version:
Install the program as follows and sobreesecribe.
No matter which version you have before (even if you have another custom firmware).
Installation:
- Copy the folder to your psp CFWEnabler in X: / PSP / GAME /
Example X: / PSP / GAME / CFWEnabler / EBOOT.PBP
Changes 3.70:
- Improved uninstalling system.
- Improved the internal patching.
- Fixed internal errors.
- Code restructured.
- Patch MHUSpeed.
- Menu of change of custom.
- Mac switch menu customized.
- Menu MHUFS.
Clarification of version 3.70:
The version 3.70 does not bring the game support than 5.03 because it is better to respect the dates in the current market.
When you pass these dates take out a version with the support.
Sorry for the inconvenience, but programmers need to eat ...
Changes 3.60:
- Now Free UMD Region option works properly
- French Language
- Fixed bug in network update
- Improved the system version
- SHA1 verification on files to be installed in flash
- Improved flash system of custom firmware
- Improved the core of flasher
- Improved the Pops flashing system
- Eboot.pbp of minor size
3.51 Changes:
- Fixed a bug that was making problems on net gaming.
- Improved the Pops flashing system.
- New system version.
- Changed updates server
3.50 Changes:
- Fixed a bug with the game for the networkinfrastructure (if you fail to function properly it is necessary toreturn to change the version.txt in this version, simply reescribelo inthe menu)
- Improved system for updating network.
- Improved system distorts the direction of Mac
- Improved system plugins (yes, again ...)
- Enhanced the program's inception, is now a second faster.
- Increase the limit of error in the installation 10.
3.30 Changes:
- Improved menu options.
- Fixed bug in network update.
- Now you can change version.txt to 5.51.
- Spoof Mac address in XMB.
- Improved the ChikHEN patch system.
3.20 Changes:
- Now you can use plugins that are not on seplugins folder
- Now we use our own modules, not GENyUS ones.
- Version is now 5.00M33-6
- Native 5.03 Pops is now supported.
- MS Speed Patch available
- Fixed bug that did not patch version.txt properly
- Quick Start mode (Autostart if you dont press R Trigger)
3.10 Changes:
- Improved system flasheo is now much safer.
- Improved uninstalling system, it is now much safer.
- Added Spanish language.
- Added Internet Update.
- Improved startup (now a little faster)
- The Eboot.pbp now occupies less.
- Fixed internal problems.
3.01 Changes:
- Fixed bug that did not let you load plugins in vsh.
3.00 Changes:
- PSP 3000 is now supported.
- Graphical interface improved.
- Network update option added (Server Needed)
- Official network update blocking option.
- New configuration options.
- Free UMD Region.
- Pic0/Pic1 Hide.
- version.txt
- Registry Hacks.
- CPU overclocking.
- Solved several bugs
2.51 Changes:
- Solved the bug that didn't allow some plugins to be enabled.
2.50 Changes:
- Fixed bug that prevented version of patching Hen and leaving a game.
- Improved system pops, now you can install a version flash (whether it is 5.00)
- Fixed a bug that prevented either activate the plugins.
- Improved system of detection version, you can install over previous versions (not recommended).
- Improved detection system ף n model, no longer crashes with modified versions of the hen (original versions are recommended).
- Fixed a bug that crashed into the configuration men randomly.
- Improved the patching system ChickHEN.
- It is not necessary that the folder is called CFWEnabler.
2.10 Changes:
- Fixed to a problem when changing options of plugins.
- Fixed internal problems.
- Fixed a problem that caused a crasheo when acceding to plugins and not having no plugin.
- Improved the detection of version.
2.02 Changes:
- Fixed a bug in the installation of the Pops (The PRX MD5 is different in each PSP, which is why the test works, but not in the other consoles)
2.01 Changes:
- Fixed a bug not detect either a previous installation (caused that could not be installed above the new version)
2.00 Changes:
- System pops native activation.
- System configuration Custom Firmware.
- Verification MD5 of files that are installed in flash, if you have not installed either, re-install.
- Nice interface.
- Safety flasheos unnecessary.
- Protection from ChickHen load the Custom Firmware.
(It is necessary that this ChickHen in a folder called "ChickHEN inside Photo or Pictures.)
- Changed version of the system (now shows 5.03 M33)
Installation:
- Copy the folder to your psp CFWEnabler in X: / PSP / GAME /
Activate Pops:
To enable compatibility with Native Pops, it is necessary to remove some modules of the firmware 5.00 official.
- Required --
- A PSP that enables homebrew loading (or PSP 2000 with Hen CFWEnabler voucher)
- The 5.00 update from Sony. (http://rapidshare.com/files/154173870/500.PBP)
- PsarDumper with support for 5.00. (http://rapidshare.com/files/165390935/psardumper500_3000_too.zip)
1.-The PsarDumper copy of our report.
2.-copy the firmware 5.00 to the root of the PSP under the name "EBOOT.PBP"
3.-execute the PsarDumper.
4.-click on "X" and waited.
5.-When finished, enter usb from pc and have a root folder called F0.
6.-looking pops.prx files in the folder and popsman.prx kd (in F0)
7.-The Copy To Folder Pops within CFWEnabler (X: / PSP / GAME / CFWEnabler / Pops)
8.-Run the CFWEnabler.
9.-click on the option "Enable Support Pops."
10.-We followed the instructions.
11 .- Done, and you can delete the files from the Memory Stick Pops, both the EBOOT.PBP and the F0 folder as the files in the folder CFWEnabler / Pops.
Warning: Using the Firmware M33 can be accessed freely by the USB Flash0 care because you can cause a brick, you are advised not to change anything to the internal memory.
Acknowledgments:
- A Dark_AleX for the M33 modules.
- Especially him, who knows who he is, and that is part of the credit for helping him
刷过之前版本的请重新刷最新版本3.60！
=================================
老版本3.01介绍和使用如下：
在2009年6月6日，GEN发布5.03GEN FOR HEN，让玩家们通过5.03GEN-A系统完成了PSP3000运行ISO游戏的美好愿望。到了6月8日，M33加载器CWFEnable的作者Xenogears似乎也按捺不住了，随机放出第二个PSP3000可运行ISO程序，——CWFEnable3.00，随后亦更新至CFWEnable3.01，这个基于HEN R2的M33加载器，通过这个往F0刷写M33的部分模块让我们可以运行ISO，PS游戏，加载插件等如同M33的功能，且相比GEN的5.03GEN-A，该系统的界面则更显得友好，现在就来为大家讲解详细的使用方法。
CFWEnable3.01功能叙述
-3000可用
-美化了图标
-支持网络升级
-屏蔽官方系统升级
-添加新的选项设定
-解放了UMD的限制
-隐藏了pic0.png和pic1.png
-可以使用version.txt
-注册信息破解
-CPU 频率可改变
-修正了部分BUG
-3.01版修正了在VSH下无法读取插件的BUG
安装方式
-先对你的PSP3000(5.03官方系统）使用HEN R2漏洞进入5.03 ChickHEN
-之后下载CWFEnable3.01。解压并将PSP文件夹解压到记忆棒根目录，如提示是否覆盖，全部选是，然后用PSP运行CFWLOADER3.01，会出现这样的界面，选择第一项。
http://www3.levelup.cn/bbsimg/upload/2009/06/08/75/21356086015963.jpg
!—Flash And Start 写入M33模块
!—Flash Pops Modules写入POPS的模块
!—Changelog说明文本
!—Uninstall卸载M33模块
!—Exit退出
-之后会有这样的提示问你是否继续，点YES后会程序自动往F0里加载数据（无变砖危险）
http://www3.levelup.cn/bbsimg/upload/2009/06/08/75/21356092221029.jpg
-加载完成后会出现这样的界面，继续点YES。OK，你已经成功的加载了CFW
http://www3.levelup.cn/bbsimg/upload/2009/06/08/75/21356098539672.jpg
-完成加载后，我们再进入系统信息看看，看看是不是已经变成5.03M33了。
http://image1.levelup.cn/c/news/images/090608105737250.jpg
游戏测试（均为PSP3000下截图）
http://www3.levelup.cn/bbsimg/upload/2009/06/08/75/21402026611985.jpg
《死神 BLEACH 灵魂升温 6》中文版
http://www3.levelup.cn/bbsimg/upload/2009/06/08/75/21402031326483.jpg
PSN上的PSone《最终幻想VII》
http://www3.levelup.cn/bbsimg/upload/2009/06/08/75/21402036031690.jpg
《怪物猎人 便携版 2nd G》
M33 MENU界面说明http://www3.levelup.cn/bbsimg/upload/2009/05/29/75/162807214812768.jpg在系统界面按SELECT即可呼出M33 VSH MENU
!—CPU CLOCK XMBXMB下的CPU频率，建议333/166，读取速度快
!—CPU CLOCK GAME 游戏中的CPU频率，建议333/166，读取速度快
!—USB DEVICE 连接USB时的路径，调成Memory Stick（记忆棒）即可
!—UMD ISO MODE 免引导设置，推荐设置成M33 DRIVE，如果发现游戏无法运行的话就改成SONY NP9660
!—ISO VIDEO MOUNT 这个是看UMD VIDEO的选项，在有引导盘的前提下在这项里选择好你需要看的UMD VIDEO之后，在视频那项可以看到你需要的UMD VIDEO（UMD VIDEO的ISO放在ISO/VIDEO文件夹里）
!—SHUTDOWN DEVICE 关闭电源。就是关机咯
!—RESET DEVICE 重新启动PSP，相当于关机再开机
!—EXIT 退出VSH菜单
恢复模式说明 当加载CFW程序完成后，再次进入CFWEnable3.01就可以看到这样的界面，其功能相当于M33的恢复模式。http://www3.levelup.cn/bbsimg/upload/2009/06/08/75/22074786015900.jpg
里面有setting（设置）flash pops modules（写入POPS模块）changelog（更新说明）
http://www3.levelup.cn/bbsimg/upload/2009/06/08/75/22074790722840.jpg
进入setting可以看到这样的界面。
!—Hide Corrupt Icons屏蔽破损的图标
!—Autorun program 自动运行程序
!—UMD MODE免引导模式
!—FakeRegion伪装PSP场地
!—Use VshMenu使用VSHMENU
!—XMB Usb DeviceXMB是USB的连接目标。千万别乱设置，默认MEMORY STICK即可
!—USB charge插上USB线时就开始充电
!—Free UMD Region取消UMD的区域限制
!—CFWEnabler Online UpdatedCFW在线升级
!—Hide Pic0 and Pic 1屏蔽PIC0.PNG和PIC1.PNG
!—Use version.txt使用version.txt,可以跳过PSN的检测。
CPU SPEED(调整在游戏或者XMB下CPU的频率)
http://www3.levelup.cn/bbsimg/upload/2009/06/08/75/22164662528202.jpg
Registry Hacks(注册信息破解)
!—Enter Button 设置确定键为X或者O
!—WMA 激活WMA
!—Flash Player 激活Flash播放
http://www3.levelup.cn/bbsimg/upload/2009/06/08/75/22164667237805.jpg
Change Version（改变version.txt，然后在configuration里面开启就可以达到欺骗目的）
本帖最后由 月神侠 于 2009-7-13 23:32 编辑
ChickHEN R2下载
http://bbs.newwise.com/thread-422778-1-1.html
3.60更新内容
- UMD电影可以全区了
- 添加法语支持
- 修复网络升级BUG
- 改良了系统版本功能
- 安装CFW到flash加入的校验功能，防止文件缺损
- 改进了闪存内定制固件系统
- 改进了刷写部分的核心
- 改进了PS模拟
- Eboot的尺寸更小了
3.51更新内容
- 修正了一个联机 游戏的决策性错误。
- 改进了刷写POPS系统。
- 新的系统版本。
- 更改了升级服务器
3.50更新内容
- 修复了联机游戏时的一个bug
- mac伪装系统改进
- 插件功能改进
- 启动速度提高1秒
- 安装过程的错误处理改进
- ps游戏的pops文件刷写改进
3.30更新内容
- 改进了菜单选项
- 修复了网络升级的bug
- version.txt可以更改到5.51，连接PSN不再障碍
- XMB隐藏mac地址
- ChickHEN补丁系统改进
3.20更新内容
- 可以用放在seplugins文件夹之外的插件
- 使用自己编写的模块，不再用GENyUS的东西
- 系统显示5.03M33-6
- 原生5.03的pops支持
- 增加记忆棒加速功能
- version.txt的bug修复
- 快速启动功能（当在HEN R2下启动CFWE3.20时，如果不按R键的话程序就自动进去5.03M33-6系统，不用进入设定再选start了）
3.10更新内容
- 现在支持psp3000
- 图形界面进一步美化
- 网络升级功能添加（需要服务器支持）
- 破解系统升级功能添加
- 防止升级成官方系统功能添加
- 新的设定选项添加
- UMD电影全区功能
- CFWEnabler在线更新
- 隐藏pic0.png和pic1.png（为了让游戏显示的更快）
- 使用version.txt（自制系统破解PSN版本检测）
- 修复了之前检测不到插件就死机的问题
- 经典恢复模式中的registry hacks选项添加（改变圆圈或者叉为确定键，激活wma和flash）
- 增加了选项设定version.txt
- 增加选项设定cpu频率
- 修复了3.00版本在vsh不能读取插件的问题 2000最后的堡垒被攻陷了么 这个东西运行像那种自制软件一样吗？听起来像虚拟程序一样的东西...... 哇,厉害厉害,期待3000完全破解 赶紧买3000啊~ 这,,,终于破解了 虽然没神电省心，但也凑糊。 求助一下，刚升的UC6.5发不了新帖只能插这了，说请选择分类，找死都找不到分类的下拉菜单，不好意思一下，半年前Home失灵过，那时我是把整条板的排线扭了一圈后暴力装上的，到昨天晚上为止一切正常，现在情况是音量－，亮度调节和选择键没了，怎么扭都没反应，其它一切正常。
现在只能换了吧，我想问下大概多少钱，我的是1000的，应该没多少配件了吧，2000的能不能配得上，先谢了！ 現在新的破解是不是重開機的話.會變回5.03?然后要再手動變hen再變m33...?
(參考別的地方看到的方法) 朋友上星期看到這台新機才1000不到,但因玩不了ISO沒有入手,入了台800塊錢的2手1000
沒想到1星期後居然破解了..................囧rz! 現在破解真設越來越快 更新2.50版 更新3.01 lz，我只想知道新的破解在重开机后还是会变回官方系统吗？ 那是当然的呀 当然？！当然会变回官方系统？！
如果是这样的话，虽然这的确是一个突破，但我还是不得不说一句：我草！！！ 17# kallin
...
"成事不足败事有余"的败事,原因之一就在于耐心不足. 已经刷了GEN····不知道再刷cfw会不会有不好的事情发生··· 更新3.10
页:
[1]
2